Efficient Visible-to-UV Photon Upconversion Systems Based on CdS Nanocrystals Modified with Triplet Energy Mediators

Developing high-performance visible-to-UV photon upconversion systems based on triplet–triplet annihilation photon upconversion (TTA-UC) is highly desired, as it provides a potential approach for UV light-induced photosynthesis and photocatalysis. However, the quantum yield and spectral range of visible-to-UV TTA-UC based on nanocrystals (NCs) are still far from satisfactory. Here, three different sized CdS NCs are systematically investigated with triplet energy transfer to four mediators and four annihilators, thus substantially expanding the available materials for visible-to-UV TTA-UC. By improving the quality of CdS NCs, introducing the mediator via a direct mixing fashion, and matching the energy levels, a high TTA-UC quantum yield of 10.4% (out of a 50% maximum) is achieved in one case, which represents a record performance in TTA-UC based on NCs without doping. In another case, TTA-UC photons approaching 4 eV are observed, which is on par with the highest energies observed in optimized organic systems. Importantly, the in-depth investigation reveals that the direct mixing approach to introduce the mediator is a key factor that leads to close to unity efficiencies of triplet energy transfer, which ultimately governs the performance of NC-based TTA-UC systems. These findings provide guidelines for the design of high-performance TTA-UC systems toward solar energy harvesting.     

Bioinspired Triboelectric Soft Robot Driven by Mechanical Energy

A sustainable power source is a key technical challenge for practical applications of electrically responsive soft robots, especially the required voltage is over several thousand volts. Here, a practicable new technology, triboelectric soft robot (TESR) system with the primary characteristics of power source from mechanical energy, is developed. At its heart is TESR with bioinspired architectures made of soft-deformable body and two triboelectric adhesion feet, which is driven and accurately controlled through triboelectric effect, while reaching maximum crawling speeds of 14.9 mm s⁻¹ on the acrylic surface. The characteristics of the TESR, including displacement and force, are tested and simulated under the power of a rotary freestanding triboelectric nanogenerator (RF-TENG). Crawling of TESR is successfully realized on different materials surfaces and different angle slopes under the driven of RF-TENG. Furthermore, a real-time visual monitoring platform, in which TESR carries a micro camera to transmit images in a long narrow tunnel, is also achieved successfully, indicating that it can be used for fast diagnosis in an area inaccessible to human beings in the future. This study offers a new insight into the sustainable power source technologies suitable for electrically responsive soft robots and contributes to expanding the applicability of TENGs.     

“电路分析”课程混合式教学探索与实践

本文以“电路分析”课程为例，借助云班课平台，采用“SPOC”与“BOPPPS”相结合的混合式教学模式，开展探究式、个性化、参与式教学。形成了“学生中心，产出导向，持续改进”闭环。经过近年来的不断改进，课程建设已初步完成。通过对三届学生的教学实践，发现采用“SPOC+BOPPPS”的线上线下混合式教学模式，学生学习积极性、主动性明显增强，同时学习效果也得到了显著提升。     

Microwave hybrid fast sintering of red clay ceramics

This work aimed to examine the performance of the hybrid sintering of clay ceramic in a microwave furnace, compared to the sintering process in a conventional furnace. The raw materials were subjected to X-ray fluorescence, loss on ignition (LOI), X-ray diffraction, particle size distribution, real specific mass, and thermogravimetric analyses. The red clay ceramic mass was prepared, extruded, pre-sintered in a conventional furnace at 600°C/60 min, and sintered at temperatures between 700 °C and 1100 °C. The sintering conventional (resistive oven) was carried out for 60 min with a heating rate of 10°C/min. In the microwave furnace, the sintering times were 5, 10, and 15 min, with a heating rate of 50°C/min, with a sintering chamber coated with silicon carbide (susceptor). The sintered specimens were characterized according to linear shrinkage, water absorption, apparent porosity, apparent specific mass, X-ray diffraction, Raman spectroscopy analysis, spectroscopy analysis in the ultraviolet and visible regions, microhardness, and scanning electron microscopy. The results showed that microwave sintering promoted an increase in the microhardness and apparent specific mass, and reduction in water absorption and apparent porosity values, due to greater densification in the microstructure. The best results occurred for specimens sintered at 1100°C.     

Stumped nature hyperjerk system with fractional order and exponential nonlinearity: Analog simulation,bifurcation analysis and cryptographic applications

This article presents the construction and consumption of hyperjerk system having chaotic nature with the commensurate ordered fractional derivative on rapidly digitalized emerging technologies. The system analyzed analytically using Lipschitz condition and numerically with the help of predictor corrector approaches. Originality of constructed system is confirmed using log error plots which gives satisfactory small values on finite time scale. The dynamical performances of the complex system are termed in multiple phase planes by the mean of their significant nature. Stability and bifurcation analysis around the fractional derivative is also studies for the various parameter of system to check the visibility of chaotic solution. The system is also designed in analog circuit simulator with the aid of operational amplifier, anti-parallel semiconductor diodes for validation of the system. With the help of random number generators (RNGs), binary array generated from the hyperjerk system and plugged in to the NIST 800–22 test suite to measure the randomness. The array having high randomness is used as strong cypher key for the cryptographic execution straightforwardly in both direction encryption and decryption.     

Strong tribocatalytic dye degradation by tungsten bronze Ba4Nd2Fe2Nb8O30

The triboelectric effect has recently demonstrated its great potential in environmental remediation and even new energy applications for triggering a number of catalytic reactions by utilizing trivial mechanical energy. In this study, Ba₄Nd₂Fe₂Nb₈O₃₀ (BNFN) submicron powders were used to degrade organic dyes via the tribocatalytic effect. Under the frictional excitation of three PTFE stirring rods in a 5 mg/L RhB dye solution, BNFN demonstrates a high tribocatalytic degradation efficiency of 97% in 2 h. Hydroxyl radicals (?OH) and superoxide radicals (?O₂－) were also detected during the catalysis process, which proves that triboelectric energy stimulates BNFN to generate electron-hole pairs. The tribocatalysis of tungsten bronze BNFN submicron powders provides a novel and efficient method for the degradation of wastewater dye by utilizing trivial mechanical energy.     

我国鲜食玉米标准体系及营养标准研究

近年来我国鲜食玉米产业发展迅猛, 但同时也暴露出诸多产业乱象。梳理现有鲜食玉米标准体系是促进产业标准化、规范化的重要举措。本文通过对我国现行鲜食玉米标准进行梳理, 总结出目前我国鲜食玉米标准体系中抽样及一般性检测标准较完善、技术规程体系成熟、标准体系框架已建立的特点; 同时提出我国鲜食玉米标准体系存在技术规程标准内容重复、品质分级标准混乱、缺乏营养评价指标相关标准、感官评价标准混乱、缺乏甜糯玉米和笋玉米的相关标准、标准体系结构不合理等的问题; 并针对上述问题提出对应应统一技术规程标准, 建立营养评价体系, 统一品质分级标准, 统一感官评价指标, 完善甜糯玉米和笋玉米相关标准的解决办法。为鲜食玉米标准体系的建设及规范化提供参考和建议。     

电商平台产品共同购买网络的影响因素研究

共同购买网络的推荐系统应用越加广泛，仅基于网络内生结构变量研究其共同购买链接的经济意义已有局限，故加入网络口碑这一外生变量，进行更全面的分析。采用了社会网络方法中指数随机图模型进行建模，主要围绕产品销售量、产品入度、差评率和评论数4个方面因素，探究其对共同购买网络中共同购买链接形成的影响。结果显示，销售量、产品入度和评论数对共同购买链接形成的影响呈正比关系，而差评率则会显著地降低产品共同购买的几率。该指数随机图构建出的共同购买网络为在线电商平台管理网络口碑和推荐系统优化设计提供有益参考。